You can learn more from our asked questions
What is the stud opening required for a Classic Adjust EzyJamb?
For EzyJamb Classic Adjust – EZC, ensure that the stud opening is square and level, measuring:
- Single door width +15mm maximum
- Double door width + 18mm maximum
- Door height +8mm at header and + 25mm at floor level (depending on floor clearance. Check with the project manager on site to confirm floor coverings).
IMPORTANT: Studco strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.
For EzyJamb Single Rebate – SRC openings, please contact the EZ Concept team on 1300 399 526
What is so unique about the EzyJamb flush finish door jamb?
EzyJamb® is the original door jamb system that eliminates architraves, giving you that subtle, contemporary, clean line look. It’s durable, it’s affordable and is at home in commercial offices and showrooms, quality homes and public spaces like hospitals and schools.
How is the EzyJamb fixed?
EzyJamb is screw fixed to the jamb studs and header with flat headed screws (through the perforated sides) every 200mm into the wall stud, double screws in top corners and on hinges points, becoming a solid part of the wall structure.
What's included in the EzyJamb frame kit?
- 1 x Left hand door stile
- 1 x Right hand door stile
- 1 x Header
- 1 x Head Joiner (EZC only)
- Lift off channel (For EZC with Lift Off Hinges only)
- Hardware Kit including:
- 1 x Latch plate
- 1 x Plastic latch insert
- Hinge screws
How is the architrave-free EzyJamb finished with plaster walls?
EzyJamb is fitted after the plaster lining has been installed, and has 35mm perforated sides for flush finishing with top coat into the walls, achieving clean architrave free lines around the doorway.
Do I have to use any special paint or preparation methods on EZ Concept products?
EZ Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.
Can I fit architraves with the EzyJamb system?
Yes, architraves can be fitted, but the EzyJamb concept is designed to create an ‘architrave-free’ opening.
What about skirting? What can be used?
Any type of skirting can be used but to compliment the flush finish look — “Alubase” slim line aluminium skirting which is only 1.6mm in thickness is the best matching option.
What hinges should be used with EzyJamb?
EzyJamb can be used with a variety of concealed and non-mortised hinges. Stainless Stainless steel EzyJamb Herline hinges are provided with each door frame (lift off hinges are available if required).
Can EzyJamb be used if I have a solid core door?
Yes, EzyJamb can be used with a solid core door. You will need to make sure that you are using the correct hinge and quantity to accommodate the door weight, making sure the hinge screws penetrate through to the timber stud behind the jamb, so that the weight of the door is swinging off the stud, and not off the EzyJamb.
Will plaster crack around the edges of the finished EzyJamb?
Plaster around the edges of the EzyJamb will not crack if the EzyJamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. EzyJamb then becomes an integral part of the wall.
Can EzyJamb be used in a doorway with no header?
Yes, custom made EzyJambs are available with no header for full height doors.
How long does it take to fit an EzyJamb frame?
10 -15 minutes depending on the installer.
Can EzyJamb be used with masonry or brick walls?
Yes, masonry wall installation instructions are available contact email@example.com for more details.
How can I achieve that flush finish look throughout the rest of my project?
Check out our extensive EZ Concept Finishing range of products.
Cavity Sliders - How do I match in the clean line look?
A range of CavKit trims are available to transform your existing cavity slider unit into an architrave free door way. We can also supply complete flush finish SlideSets. Contact us to find out more about our SlideSet flush finish cavity sliding system.
How do I go about closing off the ends on a FastCap?
Butt up some plaster board or MDF to close off the ends. Use a reveal angle to flush off the edges and apply a gap filler product to ensure the plaster butts up to the FastCap on the inside.
Does the CavKit come with the SlideSet?
The CavKit and SlideSet are sold separately.
What jamb studs do I use for the opening for an EzyJamb?
The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.
Does the SlideSet come with a CavKit?
The SlideSet and CavKit are sold separately, please add the CavKit as an ‘add-on’ to your SlideSet order.
Can I match my windows with the clean line look?
Yes, a large range of EzyReveal angles are available so that your whole project will blend in with the architrave free look.
Is the latch plate recessed into the frame?
EZC – The latch plate is surface mounted on the EzyJamb Classic Adjust frame.
SRC – The latch plate is recessed into the frame for the EzyJamb Single Rebate (SRC).
Is EZ Concept an environmentally friendly brand?
Responsibility of and caring for the environment in which we live is a Studco hallmark that is promoted at every level of our business. Our commitment to the environment and ISO14001 accreditation means less waste and no chemical treatment is required on our products.
View Studco’s Environmental Policy for more information.
What material are EZ Concept products made from?
EZ Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.
Are your frames welded?
EzyJamb frames are not welded and are clipped together using a unique EzyJamb system that ensures an easy install and smooth finish.
What are the lead times for orders and how quickly can EZ Concept fulfill my order?
- All EzyJamb, CavKit and SlideSet products are made to order. No EzyJambs are available ex-stock.
- Lead times apply to all EzyJamb, CavKit and SlideSet orders. Typical lead time from date of order to date of delivery is five (5) working days. Longer lead times may apply in some cases. Always confirm exact lead time with Studco prior to placing order.
- All orders are accepted by Studco on a FIFO basis (first in, first out).
- For urgent orders, manufacturing processes can be expedited on request. An extra charge per jamb set is applicable to expedited orders. Expedition of EzyJamb, CavKit and SlideSet orders is not always possible and is subject to operational requirements. Always confirm exact lead time with Studco® prior to placing order.